Condensate Pot
| Overview | Products | Ordering Information | Condensate Pot Options |
Building a Part Number : Example: 6SCP3-S1608N8N-4A8N8N (6S/CP/3-/S160/8N8N-/4A/8N8N)
- 6S
- CP
- 3
- S160
- 8N8N
- 4A
- 8N8N
MATERIAL
| MATERIAL | DESIGNATOR |
|---|---|
| A312 TP316L | 6S |
| A312 TP304L | 4S |
| A106 GR.B | CB |
| A335 P11 | P11 |
| A335 P22 | P22 |
| A335 P91 | P91 |
| A182 F91 | F91 |
CONDENSATE POT
Features
All condensate pot are designed in accordance with ASME SEC. VIII Div. 1 and produced in an ASME coded workshop.
- -
- Seamless pipe construction.
- -
- Working pressure: up to Class 250 BAR
- -
- Variety of end connections available.
- -
- Extra connections can be furnished upon custmer reguest.
- -
- All threads will be protected with plugs or plastic caps as required by the custmer.
- -
- All chamber are factory tested fully prior to shipment.
TECHNICAL DATA
- *
- PT : Liquid Penetrant Testing
- *
- MT : Magnetic Particle Testing
| MATERIAL OF CONNECTION | DIMENSIONS | (UNIT : MM) | ||||||
|---|---|---|---|---|---|---|---|---|
| NO. | DESCRIPTION | MATERIAL | PIPE SIZE(D) | L | L1① | |||
| 1 | PIPE 3" SCH 40 | SEAMLESS STAINLESS STEEL 316L | NPS 3(O.D.88.9) SCH 80 | 274 | 120.8 | |||
| 2 | BOSS 1/2"(F)NPT #3000 | STAINLESS STEEL 316L | NPS 3(O.D.88.9) SCH 80 | 288 | 127.8 | |||
| 3 | PLUG | STAINLESS STEEL 316L (1/2" NPT 316L) | NPS 3(O.D.88.9) SCH 160 |
274 | 120.8 | |||
| 4 | TUBE MALE CONNECTOR |
STAINLESS STEEL 316L (1/2" NPT 316L) | NPS 3(O.D.88.9) SCH 160 |
280 | 127.8 | |||
| 5 | FLANGE 1" ANST 300# RF |
STAINLESS STEEL 316L | NPS 4(O.D.114.3) SCH 80 |
350 | 130 | |||
| 6 | NIPPLE | 1/2" SCH 40 | NPS 4(O.D.114.3) SCH 120 |
355 | ||||
PIPE DESIGNATOR
| PIPE SIZE | DESIGNATOR | |
|---|---|---|
| ANSI | NPS 2(O.D.60.3) | 2 |
| NPS 3(O.D.88.9) | 3 | |
| NPS 4(O.D.114.3) | 4 | |
CLASS DESIGNATOR OF PIPE
| PIPE SIZE | DESIGNATOR |
|---|---|
| SCH .40 | S40 |
| SCH .80 | S80 |
| SCH .160 | S160 |
END CONNECTION DESIGNATOR IN,OUT/END CONNECTIONS(1 AND 2)
| end connectors are described by first the run (1 and 2) | SIZE | DESIGNATOR | end connectors (1 and 2) |
|
|---|---|---|---|---|
|
IN,OUT/END CONNECTIONS(1 AND 2) |  |
||
| 1/2" NPT FEMALE | 8N | |||
| 1/4" NPT FEMALE | 4N | |||
| 1/2" SW SOCKET WELD | SW | |||
| fitting class on end connection is selected as per the pipe schedule rating. |
||||
SHAPES DESIGNATOR
| SHAPES | DESIGNATOR | SHAPES | DESIGNATOR | SHAPES | DESIGNATOR | SHAPES | DESIGNATOR |
|---|---|---|---|---|---|---|---|
|
2A |  |
3A |  |
4A | ||
 |
2B |  |
3B | 4B | |||
 |
2C |  |
3C |  |
4C |
* IF YOU NEED OTHER SHAPES EXCEPT SPECIFIED SHAPES ABOVE,PLEASE DO NOT HESITATE TO CONTACT.
END CONNECTION DESIGNATOR BOSS / END CONNECTIONS(3 AND 4)
| end connectors are described by first the branch (3 and 4). | POT END CONNECTIONS |
SIZE | DESIGNATOR | |
|---|---|---|---|---|
|
 |
BOSS / END CONNECTIONS(3 AND 4) | ||
| 1/2" NPT FEMALE | 8N | |||
| 1/4" NPT FEMALE | 4N | |||
| VENT PLUG | VP | |||
| HEX.HEAD PLUG | P | |||
| fitting class on end connection is selected as per the pipe schedule rating. |
||||
|
＊If all end connections are the same, size should be written only once. ＊Class of end connection is sellected by the pipe schedule. ＊Socket weld connection as per ANSI B16.11 ＊Butt welding ends as per ANSI B16.9 ＊NPT as per ANSI B1.20.1 taper pipe threads |